POS Board 32GB eMMC, WF-P3399, AndroidSBC, Austin

TL;DR: POS Board 32GB eMMC

AndroidSBC peripheral desk: printer, scanner, cash drawer and payment reader driver SDK declared production-ready serving Austin, United States. The WF-P3399 POS Android motherboard spans the dual-screen high definition POS with 4K promotion wall and eleven sister models in the WF-P series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, HDMI 2.0 plus eDP output at 4K@60Hz, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Austin and United States importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

The WF-P family from AndroidSBC, a Wanlin Manufacturing Group export brand, covers eight silicon tiers from the Rockchip RK3576 octa-core platform down to the Allwinner A133 entry tier. For Austin buyers the practical consequence is simple: one driver contract, one mounting pattern and one firmware baseline across every lane of a rollout, whether the lane is a supermarket checkout, a restaurant counter or an unattended forecourt cabinet. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for United States, bundled with the lot so the importer clears customs without a second round of test reports.

WF-P3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3399 (dual-screen high definition POS with 4K promotion wall) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For United States importers sourcing the WF-P family, the WF-P3399-A variant is the typical configuration for the flagship store checkout plus media wall use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for United States Buyers

Dual-screen POS is where most competing boards fail quietly. They list two display interfaces, but the second lane is a mirror rather than an independent framebuffer, so the customer display cannot carry a separate promotion loop.

For payment certification AndroidSBC supplies the evidence pack rather than an opinion: the board-level security description, the trusted execution description where the tier supports it, and the FCC / UL route applied in United States as a documented path the Austin acquirer can audit. The Austin frame agreement converted to a firm order on September 23, 2026 - 51800 boards, Los Angeles - Shanghai lane, one BOM, one firmware baseline, and the United States compliance pack bundled.

Competitive Comparison: WF-P3399 vs Competing POS Android Boards

Competing boards reaching Austin usually win on unit price and lose on everything that happens after the first container. The four points below are where that shows up.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Asia Pacific leads the market by value, North America follows, and the merchant mix in United States sits somewhere between the two. For Austin buyers the practical reading is that the same board family has to serve both a high-throughput supermarket lane and a single-counter boutique.

• Entry counter tier: WF-P3399 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P1330 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P6180 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

AndroidSBC reads the United States cycle as a firmware problem as much as a hardware one, which is why the seven-year update window is written into the WF-P family rather than offered as an option.

Partner Success Story: Rheinland Kassen Systeme (discount chain checkout integrator)

A recent Rheinland Kassen Systeme deployment in the German discount retail segment shows how the WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Austin integrators. Rheinland Kassen Systeme rolled out 51800 WF-P boards across 132 discount store lanes.

• OEM relationship: AndroidSBC private-label SKU shipped with Rheinland Kassen Systeme branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus FCC / UL conformity, all bundled into the Shenzhen source-factory shipment.

Rheinland Kassen Systeme Head of Checkout Hardware for German Discount Retail highlighted: Rheinland Kassen Systeme runs the TSE fiscal export interface on the WF-P board, and 51800 units were accepted into the Austin discount group after the bench validation.

Field Report: flagship store checkout and media wall installation

LONGGANG, September 23, 2026 - Jin Tao, AndroidSBC field desk. The WF-P3399 board designated for the dual-screen high definition POS with 4K promotion wall application was pulled from the same production lot as the pilot batch, so the United States team received an identical configuration. The WF-P3399 POS Android motherboard order for Austin, United States cleared the burn-in station on schedule and is en route via the Los Angeles - Shanghai lane.

The WF-P3399 dual-screen high definition POS with 4K promotion wall production lot includes the WF-P3399-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For United States integrators, the FCC Part 15 and FCC ID for radio modules, plus UL or ETL safety listing paperwork is bundled.

Filed by Jin Tao, AndroidSBC field desk, LONGGANG. US retail chains pair the board with a PCI PTS listed PIN pad and ask for FCC identifier plus EMV L3 pre-certification evidence before the first lane goes live.

WF-P3399 Application Scenarios

The WF-P3399 dual-screen high definition POS with 4K promotion wall sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3399-A configuration is the typical build for the flagship store checkout plus media wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3399 drives the cashier screen while the second lane carries the customer display or the promotion wall in Austin.
• Convenience and small format stores: the WF-P5270 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P7600 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P7601 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P7602 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Austin: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Austin Buyers

AndroidSBC runs three commercial tracks on the WF-P family, and Austin partners usually start on one and move to another as volume builds.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

The Austin partner keeps the commercial relationship; AndroidSBC keeps the factory discipline. That division is what makes the tracks work at volume.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a dual-screen high definition POS with 4K promotion wall?

Answer: Supported. dual-screen high definition POS with 4K promotion wall is part of the standard WF-P configuration set, and the board ships to Austin with the drivers and the firmware baseline already matched.

Which silicon tiers are available in the WF-P family for United States buyers?

Answer: The family covers eight platforms from the RK3576 octa-core tier down to the A133 entry tier. The RK3399 board in this configuration is supported for seven years from release.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: One board handles all four. The driver SDK ships in the carton covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC, RFID, magnetic stripe, IC card, PIN pad and fingerprint reader.

What is the minimum order quantity and the sample lead time for United States?

Answer: For Austin buyers the entry point is a single sample board on a 1-3 day lead. Volume follows a 15-30 day production slot, booked against an allocation rather than quoted spot.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes - custom ROM, boot logo, boot animation, pre-installed applications and UI work are all available, and the customised image becomes the reference build for later lots.

How are firmware updates delivered to a United States estate after deployment?

Answer: Staged OTA with rollback ships with the board. The United States partner controls the wave size and the timing, and the watchdog recovers a lane that fails mid-update.

What shipping terms does AndroidSBC support for United States orders?

Answer: FOB Shenzhen, CIF and EXW terms are all supported, with export customs clearance handled at the factory. The Austin partner chooses the Incoterm that matches its broker arrangement.

What happens if a board fails in the field in United States?

Answer: Every unit is serialised against its test record. A United States field failure is traced, the root cause is confirmed on the bench at Longgang, and the replacement ships against the frozen BOM.

Contact AndroidSBC: Start Your WF-P3399 Sourcing Conversation

For the WF-P POS Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Austin integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Austin and United States buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-P family.